0577-86833336 86807568
Position:Home - Products - Single bag filter
Single bag filter
Single bag filter  Operating Principle Technical Parameter Installing Dimension Documents Downloads
Operating Principle:

  ´üʽ¹ýÂËÆ÷

 

Categories of Bag filters :by the amount of the filter bag , a single bag, double bag and multi-bag; By the  flow mode, SIDE-IN/TOP-ENTER & MORE-BAG; By the way of connect, with a single package, parallel exchange ceremony various sets of modular and mobile. According to the different requirements of each SAAR bag filter can have a different structure, the shape and material of the collector scope of the flow is 6~800m3/h, accuracy 1~800 ¦Ìm. 0~1.6MPa, work  temperature -10~120 degrees. The use of filters corresponding forms, should select fitful bags of materials, shapes accuracy to ensure the accuracy of results.

 

A whole system can be divided into three parts: filter containers, and supporting basket and the filter bags. The basket supports the filter bag, filtered liquid flows into the top of the filter bag (known as feed-in the top of the structure). So the liquid can be evenly distributed over the entire surface of filter bag filters, thus level of fluid distribution cone to constant without the disturb of Turbulence ,result in good performance 

liquid flow from the inner surface to  out surface, the particle filtered are retained in the Bag, that ensure  the replacement would not pollute the liquid  downstream.

Handle designed in the bag enable the replacement very convenient.

 Net of high strength stainless steel and Piercing Network makes up the supporting basket, which ensure the filter surface in the filtration system greatly improved and provides a very large and smooth surface.

It has the following characteristics: high liquidity; Bag life extension; Liquid flow uniformity, the uneven distribution of particle filters in the filter bag; high filtration efficiency; lowest cost in the scope 1-1000 of  microns filtration.





Infotime:2006/6/7 Hits:12271 [Print][Close]