Wenzhou Boao Mechanical Manufacturing Co.,Ltd

Products List

Position:Home - Products - CJ Series Sanitary magnetic mixer (bottom entry

CJ Series Sanitary magnetic mixer (bottom entry Operating Principle Technical Parameter Installing Dimension Documents Downloads
1.Product Desciption:

CJ series is Normal Model mixer of BOAO, which separation sleeve is welded directed with tank

Application

Bottom entry magnetic agitator ,which is also call magnetic mixer, which presents a highly hygienic solution for the applications of dispersion, dissolution, homogenization and mixing of a wide range of media in the pharmaceutical industry.The magnetic agitators are especially useful in sterile processes; absence of mechanical seals prevents any contact with the exterior environment.

The most common applications are dissolution of glucose in dematerialized water, maintenance of vaccine suspensions homogeneity and agitation of blood fractions, also for pharmaceutical such as vaccine mixing.

2.Working principle:

Operating principle

1. The mixing impeller produce a vortex ,which sucking the soluble powder or liquid towards to the impeller

2. After reaching the impeller, the fluid flows in a radial direction rush to the tank wall by the centrifugal force of impeller.

3. After reaching the tank wall ,the fluid travels upwards and then circulation down to the suction end of impeller.

4. The overall bulk movement and the mixing action around the mixer ensure that a homogeneous ,mixing ,dissolving, dispersing, is achieved.

3.Technical parameters:

Design and features

High blending capacity with low shear.
Magnetic coupling. No risk of leakage.
CIP/SIP design.
Bayonet coupling for easy assembly/disassembly of the drive unit.
Low power consumption.
Effective blending even of small volumes.
Very low particle generation.
Bottom mounted. Excellent for suspensions.
Practical when there is no much space at the top of the tank.
Frequency converter recommended.
Autoclavable agitating element (with previous disassembly of the drive unit).

Materials

Rotor                        AISI 316L or 304
Welding plate           AISI 316L
Bearing                     SIC
Surface finish           Ra< 0.5

Options

Bearing: SiC.
Parts in contact with the media:
special materials
Electropolished.
Speed sensor.
Control panel.

With warm speed reducer: Fixed speed range from 50-186rpm (according to different process)

Wish gear speed reducer: Fixed speed range from 150-600rpm (according to different process)

With 6-pole motor: Fixed speed at 960 rpm , which can be equipped with frequency converter, to control the speed.

4.Installation dimensions:

Model	Capacity (L)	Matched power ( w)
Model	Capacity (L)	≤120rpm	≤230rpm	≤350rpm	≤450rpm	≤620rpm	≤960rpm
CJ5/67	10-200	60	60	90	120	180	250
CJ5/78	10-300	60	90	120	180	250	370
CJ10/108	50-800	90	120	180	250	370	550
CJ10/114	100-1200	120	180(250)	250	370	550	750
CJ20/130	200-2500	180	250(370)	370	550	750	1100
CJ20/145	200-3000	250	370(550)	550	750	1100	1500
CJ30/145	300-4000	370	550	750	1100	1500	2200
CJ30/165	500-5000	550	750	1100	1500	2200
CJ40/175	500-8000	550	750	1100	1500	2200	3000(4000)
CJ40/190	1000-3000	750	1100	1500	2200	3000
CJ60/190	1500-15000	750	1100	1500	2200	3000	(4000)5500
CJ60/220	1500-15000	1100	1500	2200	3000
CJ80/215	2000-20000	1100	1500	2200	3000	4000	7500
CJ80/245	3000-20000	1500	2200	3000	4000
CJ120/240	4000-25000	1500	2200	3000	4000	5500	11000
CJ120/275	5000-20000	2200	3000	4000	5500
CJ160/280	6000-30000	2200	3000	4000	5500	7500	15000
CJ160/320	6000-30000	3000	4000	5500	7500
CJ200/342	10000-35000	3000	4000	5500	7500	11000
CJ200/390	12000-35000	4000	5500	7500	11000
CJ300/415	15000-40000	5500	7500	11000	15000
CJ300/460	20000-50000	7500	11000	15000	18500

Infotime:2006/6/2 Hits:15647 [Print][Close]