Introduction

TL-titanium rods of stainless steel filter is sealed containers and the formation of titanium alloy filter rods. its filter was made of hollow titanium metal powder sintering filter tubes, with 40% porosity permeability. compressive strength, low density, corrosion resistance and other characteristic. Filters for liquids and gases, liquid DECARBONISATION particularly good results, superior corrosion resistance of stainless steel and titanium, is harmless to the human body. China pharmacopoeia requirements. Titanium rod filters simple structure, the cylinder from above and silicone rubber ring between the fastening bolt with a sealed container. contents titanium rod fixed shelves, the shelves will filter into the upper and lower two-shape room with water purification room, cylinder intake and outfall and has a pure export. Use all their material 316L (or 304), who among these components. 

Application

(1) liquid filtration 1, the pharmaceutical industry, various syrup filters, injection water injections saline injections without filtration. 2, industrial water, water, gas water clarify degerming. 3, beverage, food, brewing industry filter. 4, electronics, optical lens grinding high water. 5, the chemical industry pH liquid filtration Alcohol recovery.

(2) gas trap 1, the pharmaceutical industry acidic gases dry dust. 2, pharmaceuticals, beer brewing industry preparation of sterile air. 3, the aviation and transportation industries, high-pressure air filtration. 4, the chemical fiber industry with mixed gas purification. 5, various air compressor oil filter impurities in the air

Structure of  Titanium rod filters is simple, it is a sealed with Silicone Rubber close circle and Bolt between the top cover and the body, inside Titanium is fixed to the Diaphragm. Which divided the filter into twice for original water room and  Purification room, there are inlet and outlet, or water. Material select for 316L stainless steel.

Technical parameters

1、 Titanium rod filteringprecision：1－50um

2、     Pressure：≤0.3Mpa

3、     Tempreture：≤110℃

4、     Model and specs ：